5.0
Owner's of the Bertazzoni Range Bertazzoni Range gave it a score of 5.0 out of 5. Here's how the scores stacked up:
15
Cleaning the appliance:
Never use abrasive cleaners
Before cleaning the appliance it should be disconnected from the power supply.
Cleaning the work surface: periodically clean the burner heads, the enamelled steel pan supports and the
burner caps using warm water.
Any spillage must always be removed as soon as possible using a rag.
If it become difficult to open or close a valve, do not force it, but immediately request the assistance
of the technical service personnel.
Cleaning the enamelled parts: Enamelled parts should be cleaned frequently with soapy water. Never use
abrasive powder. Do not leave acidic or alkaline substances on the enamelled parts (such as vinegar, lemon
juice, salt, tomato sauce, etc.) and do not wash the enamelled parts while they are still hot.
Cleaning the stainless steel parts: Clean the parts with soapy water and dry them with a soft cloth. The
shine is maintained by periodically using suitable products which can be found in the supermarket. Never
use abrasive powders.
Cleaning the burner caps: Lift the burner caps from the burner heads and wash them in soapy water and
dry thoroughly. Before replacement on the burner head ensure that the holes are not clogged.
Cleaning the glass ceramic: Warning: Do not use any kind of cleaner on the glass while the surface is hot,
use only the razor blade scraper. The resulting fumes can be hazardous to your health. Heating the cleaner
can chemically attack and damage the surface.
Clean the surface when it is completely cool with the following exception: remove dry sugar, sugar syrup,
tomato products and milk immediately with the razor blade scraper.
Wipe off spatters with a clean, damp sponge or a paper towel. Rinse and dry. Use white vinegar if smudge
remains; rinse.
Apply a small amount of the glass ceramic cooktop cleaner. When dry, buff surface with a clean paper towel
or cloth.
TYPE OF STAIN WHAT TO DO
ACCESSORIES or AGENTS
EMPLOYED
Minor Soak the area to be cleaned with soapy
water, then wipe it.
Cleaning sponges & mild
detergents
Accumulated burnt-on
stains
Soak the area to be cleaned with warm
soapy water. Use a special scraper for
vitroceramic glass to remove grease and
food particles. Finish off with a cleaning
sponge, then wipe it clean.
Cleaning sponges, mild
detergents and cleaning agents
for vitroceramic glass
Rings and traces of lime
scale
Apply warm white vinegar on the stain. Let
it sit, then wipe off with a soft cloth.
OR
Use a commercial cleaner on affected
area. Note that such cleaner may leave
stains on stainless steel frame, thus
protect exposed stainless steel.
Cleaning cloth, white vinegar, or
diluted descaling agent.
Burnt-on stains following
sugar spillage, melted
aluminum or plastic.
- Apply special vitroceramic glass cleaner
on the surface, preferably one which
contains silicone (protective action).let it
sit, then finish off with a cleaning sponge,
then wipe it clean.
Vitroceramic cleaning agents and
sponge.
Allowable: Non-abrasive Paste - Ordinary Sponge or Special Sponge for Delicate Items
Not allowable: Abrasive-backed sponge - Powder
Find Your Products By Category
Please Login
