0

Out of 0 Ratings

Owner's of the Electrolux Range Electrolux Range gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 52
 
32
TEMPERATURE PROBE

Figure 1
For many foods, especially roasts and poultry, testing the internal temperature is the best
method to insure properly cooked food. The Temperature Probe gets the exact temperature
you desire without having to guess. This feature can be used with Bake, Convection Bake,
Convection Roast and Perfect Turkey cooking modes. The oven can be programmed for
Probe at any temperature between 130°F to 210°F with a default temperature of 170°F. This
unit is equipped with one temperature probe entry in the upper oven only.
IMPORTANT:
1. Use only the probe supplied with your appliance; any other may result in damage to the
probe or the appliance.
2. Handle the Temperature Probe carefully when inserting and removing it from the food
and outlet.
3. Do not use tongs to pull the cable when inserting or removing the Probe. It could damage
the Probe.
4. Defrost your food completely before inserting the Probe to avoid breaking it.
5. Never leave or store the Temperature Probe inside the oven
when not in use.
6. To prevent the possibility of burns, carefully unplug the
Temperature Probe using hot pads.
Proper Temperature Probe Placement:
1. Always insert the probe so that the tip rests in the center of the thickest
part of the meat. Do not allow probe to touch bone, fat, gristle or pan.
2. For bone-in ham or lamb, insert the Probe into the center of the lowest
large muscle or joint. For dishes such as meat loaf or casseroles, insert
the Probe into the center of the food. When cooking sh, insert the Probe from just above
the gill into the meatiest area, parallel to the backbone.
3. For whole poultry (chicken, turkey, etc.), insert the probe into the thickest part of the inner
thigh from below and parallel to the leg (see gure 1).
Setting the Oven when using the Temperature Probe:
1. Insert the Temperature Probe into the food (see Proper Temperature Probe Placement above).
2. Plug the Temperature Probe into its outlet in the oven. (The outlet is located on the top
left hand side of the cavity wall, near front of the oven). Always insert the probe into a
cool oven. Make sure it is pushed all the way into the outlet. Close the oven door.
3. Start an available cooking mode by pressing 
UPPER
OVEN
followed by either 
,  or  .
4. A target temperature must be set to trigger the buzzer when the food reaches the set
temperature. Press 
to bring up the cook options items and press
 pad to enter the temperature. Adjust temperature to the desired setting
using the numeric pads or just press START to use the default target temperature
of 170°F. The pads
+
hi
or
-
lo
can also be pressed to raise or lower the temperature. The
target temperature setting will be accepted after the START
pad is pressed.
5. At any time during the cooking, the 
pad can be pressed once to display the
actual meat temperature or pressed twice to display the target temperature. When on
the target temperature display, a new temperature can be entered. After 5-8 seconds,
the display will go back to showing the oven temperature.
6. When the food reach the target temperature, the oven will go into a  mode
until you press 
.

